Metal Roofing in Aldershot

Right now it is a patched sheet roof with rust bleeding down the fascia and a bucket under the corner. After the work it is a folded metal roof with concealed fixings, clean lines and gutters that actually cope with a downpour.

Scott has spent more than 36 years on Surrey roofs and still answers the phone himself, and the same team that handles roof repairs in Aldershot handles the metal work.

Call 07428 300474 any hour and a real person will pick up.

Metal roofing in Aldershot covers standing seam zinc and aluminium, box profile sheet and metal tile sheet, installed on houses, extensions, garages and small commercial units across the town.

Metal Roofing Materials

Most metal roofs we are called to in Aldershot fall into three groups: soft metals like zinc laid as panels, aluminium sheet, and coated steel in box profile or tile-effect sheet. Each one moves differently in heat, and each one needs its own fixing pattern and clip spacing to allow that movement without buckling.

Zinc weathers to a dull grey and lasts decades on a properly ventilated deck. Aluminium is lighter, which matters on an older extension where the rafters were never sized for slate. Coated steel sheet suits garages, workshops and outbuildings where cost and speed carry more weight than appearance.

The deck under the metal decides the outcome as much as the metal itself. We lift a corner and look before quoting. Plywood, breather membrane, ventilation path and the fall all get checked, because a panel laid over a soft deck will telegraph every dip within a year. BS 5250 governs how we handle ventilation and condensation risk under a sealed metal surface.

Right metal, right deck, or nothing lasts.

Standing Seam Roofing Systems

A standing seam roof has no exposed fixings. The panels are held by concealed clips and the upstand seam is folded on site, so there is nothing for water to track through and nothing to work loose in wind. That is why it holds up on shallow pitches where interlocking tiles would not.

Seam height, clip type and panel width all follow the pitch and the exposure. Fixings are specified to BS 5534 for wind uplift, which on the open ground around Aldershot is not a formality. Flashings at abutments, verges and eaves are folded to suit the job rather than bought off a shelf in a standard length.

Roof-to-Wall and Abutment Details

Where a metal roof meets brickwork, the detail is the weak point. We use lead or matching metal soakers set into a raked chase, following Lead Sheet Association guidance on sizing and expansion joints. A single over-long piece of lead will split, and we do not lay it that way.

Rainwater and Discharge

Metal sheds water fast, so gutters sized for a tiled roof often overtop. We size rainwater goods to BS EN 12056 and fit seamless aluminium where the run suits it, so the water leaves the building instead of running down the render.

Coverage Across the Area

If you need metal roofing in Aldershot or a roofer in Aldershot for something unrelated to sheet work, we cover the whole area with our own team.

Domestic and Commercial Installations in Aldershot

Aldershot has a lot of interwar and post-war housing with flat-roofed rear additions, plus garage blocks and light commercial units with tired profiled sheet. The problems differ by building type, and so does the answer.

Extensions and Rear Additions

A shallow-pitch extension roof is where standing seam earns its keep. It sheds water at pitches felt struggles with, and the finish suits a modern kitchen extension without looking bolted on. BS 6229 applies where the roof is flat or near flat.

Garages and Outbuildings

Plenty of older garages here still carry asbestos-cement sheet. We assess it and advise the safe route under the Control of Asbestos Regulations 2012. We do not remove it ourselves, and we will tell you plainly what needs arranging before new sheet goes on.

Commercial and Workshop Units

Box profile over purlins is straightforward when the setting out is right and miserable when it is not. Sheet lengths, side laps, stitching screws and translucent panels are all set out before anything is lifted onto the roof. If you are searching for someone close to home in Aldershot who can price sheet work honestly, we are a short run away.

Different buildings, same standard of work.

We take on metal roofing services too.

Accreditations and Manufacturer Approvals

We hold no trade body membership and claim no approved-installer badge. What stands behind the work is thirty-six years on Surrey roofs, Public Liability Insurance, and a 25-year written workmanship guarantee handed over before the team leaves. That guarantee covers repairs as well as full installations.

On value, it is worth knowing what is included. The survey is free, with a drone view where the pitch makes access awkward. The price comes in writing, fixed, with no charge and no obligation. Fabrication of flashings, setting out, disposal and the tidy-up are all in that figure, and the work is done by our own roofers rather than passed to a crew we have never met. If a repair to the existing sheet will see you right, we say so instead of quoting a full replacement.

You can read more about our metal roofing services across the county. Whether you need metal roofing in Aldershot or metal roofing in Knaphill, we cover the whole area, and the same applies to our metal roofing services Cranleigh customers rely on.

One visit, one price, one written guarantee.