Guttering Systems in Aldershot

A dry wall, a downpipe running clear into the gully, and no more brown streak on the brickwork under the front bay after heavy rain.

Scott has spent more than 36 years on Surrey roofs and still answers the phone himself, and the same roofers who handle our lead work & flashing services Aldershot fit your guttering, never subcontracted strangers.

Call 07428 300474 any hour for a free survey and a fixed price in writing.

Guttering systems in Aldershot need to move the water off the roof, past the wall and away from the footings without a single joint weeping down the brickwork. That is the finished result we work back from.

Aluminium Guttering Systems

Aluminium is the material we fit most often on Aldershot houses because it holds its shape across a long run and does not go brittle in the sun. Sections are typically 1.2mm to 1.5mm gauge, powder coated after forming, with a wall thickness that takes a ladder resting against the front edge without deforming.

Profiles And Capacities

Profile choice is a drainage calculation, not a taste decision. We size the system to BS EN 12056, which sets out how much water a gutter and outlet can carry against the roof area draining into it. A 100mm half-round on a small rear outrigger and a 125mm deep-flow or ogee across a wide, steep front pitch are both correct answers to different roofs.

• 100mm half-round: small pitches, porches, single-storey rear additions.
• 115mm to 125mm deep-flow: long main elevations and steeper pitches that shed fast.
• Ogee and moulded: period frontages where the shadow line matters.
• Outlet sizing: 68mm round or 65mm square downpipe, doubled up where the run exceeds capacity.

Getting the profile right is the difference between a system that copes with a summer downpour and one that sheets over the front lip every August.

Brackets, Falls And Fixing

Brackets go at 1m centres as standard and tighten to 800mm on exposed elevations or where snow load gathers behind a parapet. Fall is set at roughly 1:600 towards the outlet, marked with a line rather than eyeballed. Fixings land in sound timber, and where the fascia behind is soft we say so before anything is hung on it.

Made-To-Measure Fabrication And Supply for Aldershot Homes

Aldershot housing is mixed: Victorian and Edwardian terraces with long unbroken frontages, interwar semis with bay windows and awkward returns, post-war estate housing, and a good deal of ex-service and married-quarters stock with shallow eaves and rendered walls. Each of those throws up a different guttering job, and we fit all of them.

Terraces And Long Runs

On a terrace the gutter often runs the full width of two or three properties before it reaches an outlet, and every sectional joint on that run is a future leak. A continuous length removes them. We measure the run, allow for thermal movement at the stop end, and set a single expansion joint only where the length demands it.

Bays, Returns And Rendered Walls

Bay windows and canted returns are where sectional guttering fails first, because the mitres are the weakest part of the system. Fabricated mitres, welded and sealed rather than clipped, hold on those corners. On rendered elevations we fix through to timber or masonry with the correct plug and stand the downpipe off the face so the render can dry behind it.

Measuring And Supply Sequence

The order of work is simple and we keep to it: survey the roof and eaves, calculate the drainage load against roof area, confirm profile and colour, fabricate to the measured length, then fit. If you are searching for a gutter installer close to home in Aldershot, our own roofers are working across this part of Surrey most weeks, so a survey slot is rarely far off.

Gutter Materials And Finishes

Material choice changes what the system costs to own over twenty years, not just what it looks like on the day.

What We Fit And Why

• Seamless aluminium: formed to length, powder coated, no mid-run joints.
• Cast aluminium: heavier sections for period frontages needing the deeper profile.
• uPVC: economical and sound on short runs, with joints every 4m that need clips checking.
• Leaf guards: worth fitting where a mature tree overhangs the run.

Aluminium does not rust, does not need painting and stays dimensionally stable, which is why it dominates our work on longer elevations.

Colours And Coatings

Powder coating is applied to the formed section in a full RAL range, with black, anthracite grey and heritage cast-iron finishes taking most of the demand. The coating is on the inside face as well, which matters because standing debris is what attacks the metal.

Coverage Across The Area

Whether you need guttering systems in Aldershot or guttering systems in Godalming, we cover the whole area with the same fabrication and the same fitters.

Seamless Gutter Installation

Seamless means the gutter is formed as one continuous length on site to the measurement taken off your eaves, so there are no sectional unions along the run to open up as the metal expands and contracts.

Installation Sequence

Strip the old system and bag the debris. Check the fascia and rafter feet, replace anything soft. Set a string line to the fall. Fix brackets at centres. Run the formed gutter, weld the mitres, seal the stop ends. Fit outlets, downpipes and shoes, then flood test the run with a hose from the far end and watch every metre of it.

Downpipes And Discharge

A downpipe that dumps against a wall base is a damp problem waiting to happen. We discharge into a back-inlet gully, a trapped gully or an existing surface water connection, with the shoe clear of the render and the pipe clipped at 1.8m centres or closer.

Same Team, Nearby Towns

Whether you need guttering systems in Aldershot or guttering systems in Knaphill, the same roofers do the work and the same written guarantee follows it.